BoX2 Erase / Delete Project with USB

The attached file is a .json that can be put on a USB stick and then plugged into a BoX2 to remove the project running on the device.

The following are the instructions on how to use it:

1. Put the attached json file in the root of an USB memory, it will be used to try delete the existing iX project on the BoX2 pro.
2. Plug the USB in while the BoX2 is running and wait until the LED turns red.
3. Remove the USB memory when the LED starts to flash purple and then reboot the BoX2.
4. When the BoX2 has booted the LED should flash purple which indicates that the unit is in standby and no iX project is running.
5. After this you should be able to transfer your iX project to the BoX2 from iX Developer.

• BoX2ConfigSet.zip

BoX2 base - Enter Update Mode

​To enter update mode on BoX2 base it need to be power cycled 3 times.
The BoX2 base can be power cycled as soon as the LED turns red.
After 3 power cycles the device should boot up in update mode and be ready to receive an update of image/system program from the Image Loader tool. The LED indicates this by a slow flashing red signal.

Box2 Diagnostics, manual and LED

• BoX2 Manual .pdf
• Box2Diagnostics.zip
• Box2Diagnostics_vnc.zip
• ReadBox2Diagnostics_OPCUA.zip
• ReadBox2DiagnosticsModbusTCP.zip

Box2 base / BoX2 pro (SC) / BoX2 extreme (SC), unknown IP \ reset \ reformat

​25.10.2019
IX 2.40SP4

If you have a BoX2, and do not know the IP of it, how can you then regain contoll of it?

- Port B in all X2 / BoX2 devices are default set to DHCP, so if lucky, you will find it by connecting the port B to a network with a DHCP service (e.g. your office)

- Secondary you need to create a new config file with the configuration software WARP, and then load this project (with known IP settings), from an USB stick. 

- The procedure on using WARP is described inn part 3.1.1 in the BoX2 manual attached, Beijer BoX2 Image Manual, User’s Guide, MAEN205 C
    

• BoX2 Manual .pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) LED indication

​24.10.2019

Status Diode of the Box2 has the following meaning:
Published in the box2 image manual 

• BoX2 Manual .pdf

3D drawing BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) in STEP format

​3D drawing box2 extreme in STEP format

• BoX2 basic_3D.STEP
• BoX2 extreme_3D.STEP
• BoX2 pro_3D.STEP

BoX2 base Outline Dimensions

• BoX2 base Outline Dimensions.PDF

BoX2 base, 1.0 b1224

BoX2 base firmware image, version 1.0 b1224​

Latest image / firmware for BoX2 base (version1) is found here:
BoX2 base Image v 1.1 b1276 (Current version)
https://www.beijerelectronics.com/en/support/Help___online?code=B7F6BAB7-8AAF-493E-88C2-2468F5FA1B6C

• Beijer BoX2 Image Manual MAEN205C.pdf
• BoX2 base LastMinuteNotes PIEN351.pdf
• BoX2 base ReleaseNotes PIEN352.pdf
• IML_TxA_build1224.exe

BoX2 base Installation Manual, MAEN274

• BoX2_base_MAEN274_English.pdf

Input regarding unsuported Drivers for X2 base (v1)/BoX2 base (v1)

• Input regarding unsuported Drivers for BoX2 Base (v1).pdf

BoX2 base / BoX2 pro / BoX2 extreme FCC - Verification of compliance

• BoX2 base_ FCC Verification.pdf
• BoX2 extreme_ FCC Verification.pdf
• BoX2 pro_ FCC Verification.pdf

CE certification, BoX2 base - BoX2 pro - BoX2 extreme

• BoX2 base_ CE Verification.pdf
• BoX2 extreme_ CE Verification.pdf
• BoX2 pro_ CE Verification.pdf

DoC battery X2 base (V2)

​DoC battery X2 base (V2)

• CR2032_EDBD-B24001-01DoC.pdf

SqlProxy - Connects iX Panels transparently to SQL Server

​There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.
​
Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

• SqlProxy_161202C.pdf
• SqlProxy_190115.pdf
• SqlProxy_191016C.zip
• SqlProxy_as_service_170330.pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) brochure BREN638 (english)

• Box2 brochure_180517_pages.pdf
• Box2 brochure_180517_spreads.pdf